Calculators / Reactance & RLC Impedance Calculator
Reactance & RLC Impedance Calculator
Find capacitive/inductive reactance, complex series or parallel RLC impedance, phase, resonance and current from an RMS sinusoidal source.
Inputs
Try the prefilled example, or enter your own values.
Result
Calculate to see the result and worked steps. Changing an input clears the previous result.
How to use
- Choose a complete series or parallel RLC network. Enter R in Ω, L in mH and C in nF.
- Enter sample frequency and RMS source voltage. At 0 Hz, the series capacitor is open and the parallel ideal inductor is a short.
- Inspect impedance phase, source current and the frequency sweep around resonance. Positive impedance phase means inductive impedance; current phase has the opposite sign.
Formula and assumptions
XL = 2πfL; XC = 1/(2πfC). Series: Z = R + j(XL − XC). Parallel: Y = 1/R + j(2πfC − 1/(2πfL)); Z = 1/Y. f₀ = 1/(2π√LC).
All three ideal parts are present. Series mode is one R-L-C chain; parallel mode is separate R, L and C branches (R is not the inductor winding resistance). R is positive, so resonant impedance stays finite. RMS steady state only; no core saturation, ESR, self-resonance, source impedance or startup transients.
Sources
Worked example
With R = 100 Ω, L = 10 mH and C = 100 nF, resonance is 5.0329 kHz. At resonance the ideal series impedance is 100 Ω and a 1 V RMS source drives 10 mA RMS.
Common mistakes
A resistor in parallel with an ideal inductor does not model an inductor with series winding resistance. Series and parallel resonance have different impedance behaviour and Q formulas. This calculator does not simulate an arbitrary RLC topology.