Calculators / Voltage Divider Calculator
Voltage Divider Calculator
Calculate a DC divider and see how a connected load changes its output.
Inputs
Example values are prefilled. Press Calculate to get a result.
Result
Use the example Vin, R1, and R2 values, then calculate. Add RL to compare a connected load. Results clear when an input changes.
How to use
Start with the example values, replace them with your own, and press Calculate. Change any input to clear the previous result. You can copy the result or a link that restores your inputs.
Formula and assumptions
Unloaded Vout = Vin × R2 / (R1 + R2). With a load, replace R2 by R2 ∥ RL.
Ideal DC resistors and a passive load. A divider is a poor power supply when the load draws substantial current.
Worked example
At 5 V with R1 = R2 = 10 kΩ, output is 2.5 V unloaded. A 10 kΩ load lowers it to about 1.667 V.
Understand the result
Calculated values are estimates from the stated model. Check equipment ratings and installation conditions before using them in a real circuit.