Calculators / MOSFET Loss & Gate Drive Calculator

MOSFET Loss & Gate Drive Calculator

Estimate conduction and overlap switching loss, gate-driver demand, and a first-pass junction temperature.

Inputs

Try the prefilled example, or enter your own values.

Result

Calculate to see the result and worked steps. Changing an input clears the previous result.

How to use

  1. Use RDS(on), Qg and switching times measured at comparable current, gate drive and temperature.
  2. Enter PWM duty and frequency. Set frequency to zero to omit periodic switching loss; use 100% duty for continuous DC conduction.
  3. Check device losses, gate-driver demand and board-specific thermal resistance separately.

Formula and assumptions

Pcond = Ion²RDS(on)D. Poverlap ≈ ½VDSIon(tr + tf)f. Pgate = QgVgatef. Tj ≈ Ta + θJA(Pcond + Poverlap).

Constant on-state current, hard switching with triangular voltage/current overlap, entered RDS(on) at the intended gate voltage and temperature. Gate-drive energy is reported separately because it is dissipated across the driver and gate resistances. No Coss, diode recovery, avalanche or temperature feedback.

Sources

Worked example

For 2 A, 12 V, 50 mΩ, 50% duty, 100 kHz, 20 ns rise and fall: conduction loss is 0.1 W and overlap loss 0.048 W. Qg=20 nC at 5 V adds 0.01 W of gate-drive demand.

Common mistakes

Gate threshold is not the voltage for fully enhanced operation. θJA is board-dependent; these limited loss terms cannot certify the safe operating area.

Continue your circuit