Calculators / SMD Resistor Code Calculator — 3 Digit, 4 Digit & EIA-96

SMD Resistor Code Calculator — 3 Digit, 4 Digit & EIA-96

Decode 3-digit, 4-digit, R-decimal, and EIA-96 resistor markings. See the lookup value and multiplier without guessing an unknown marking system.

Inputs

Try the prefilled example, or enter your own values.

Result

Calculate to see the result and worked steps. Changing an input clears the previous result.

How to use

  1. Select the marking system before entering the code. Changing systems loads a matching example.
  2. Enter the resistor marking only. Lowercase R and multiplier letters are accepted.
  3. A zero code denotes a nominal zero-ohm jumper; check its datasheet for real resistance and current limits.

Formula and assumptions

3/4 digits: leading digits × 10^(last digit) Ω. R replaces the decimal point. EIA-96: table value × letter multiplier.

The selected marking convention must match the component manufacturer. EIA-96 lookup numbers are 01–96; supported letter multipliers are Z, Y, X, and A–H. Special proprietary codes are not guessed.

Sources

Worked example

472 = 47 × 100 = 4.7 kΩ. 1001 = 100 × 10 = 1 kΩ. 4R7 = 4.7 Ω. EIA-96 01C = 100 × 100 = 10 kΩ.

Common mistakes

0603 and 0805 are commonly package sizes, not the resistance marking. A number decoded under the wrong system can produce a plausible but incorrect value. The marking alone does not establish tolerance or power.

Continue your circuit